Tag: amiga
-
Open Kickstart Switcher
Open Hardware Kickstart Switcher for Amiga Computers by SukkoPera. Summary OpenKickstartSwitcher is a Kickstart switcher for Amiga computers, based on work by Henryk Richter. It allows switching among three or six different Kickstart images, stored in an EPROM. The switching can be done through physical switches or by pressing the mouse/joystick buttons at power-up. The…
-
Greaseweazle
USB device and host tools allowing versatile floppy drive control. By extracting the raw flux transitions from a drive, any disk format can be captured and analysed: PC, Amiga, Amstrad, PDP-11, musical instruments, industrial equipment, and more. Greaseweazle also supports writing to floppy disks, from a range of image file formats including those commonly used…
-
SDBox Mini for Amiga
Original project by Jorgen Bilander and Niklas Ekström It is a small device that you can plug into your Amiga’s parallel port and get access to a sd-card formatted with e.g. a windows FAT file system. It uses an Arduino Nano V3 and a common cheap MicroSD Card Adapter that has a voltage level shifter…
-
Plipbox
plipbox is an Arduino-based device that allows to connect low-end classic Amigas via Ethernet to your local network. It bridges IP traffic received via PLIP on the parallel port of the Amiga to the Ethernet port attached to the Arduino by Christian Vogelgsang. With the plip2slip project I already presented a device that uses a…
-
Open Video Modulator
OpenVideoModulator is an Open Hardware adapter that converts an RGB video signal to Composite and S-Video by SukkoPera. OpenVideoModulator is an Open Hardware implementation of a small circuit found on the Amstrad CPC Wiki that is able to produce a composite video signal from separate red, green and blue color component signals (plus sync). Since it uses…
-
OpenAmiga600RamExpansion
Open Hardware by SukkoPera 1 MB Chip RAM Expansion for the Commodore Amiga 600 Computer with optional Real Time Clock. Summary The Amiga 600 computer by Commodore originally came with 1 MB of Chip RAM. Like all “compact” Amiga models, it has a trapdoor in the bottom, through which a memory expansion can be installed,…
-
DIY-A586
FPGA board with HDMI output, floppy disk support and SD card, can emulates Amiga (Minimig), PC 8088, NES, RISC-V, ZX-Spectrum. Open source project by Piotr Gozdur Main menu Available cores
-
HxC Floppy Emulator toolkit
Features Import and convert many floppy image file formats. Import, analyze and convert floppy stream files images. Create/Browse DOS/FAT and AmigaDOS floppy images. Create floppy disk images with custom sector layout. Low level track and disk inspection. Floppy disk read function. And many more ! HxC Floppy Emulators main websites https://hxc2001.com https://hxc2001.com/floppy_drive_emulator Forum https://torlus.com/floppy/forum HxC…
-
Gotek Floppy Disk Emulator V2
Floppy disk emulator for old computers and machines, Amiga, Atari ST, etc. By RichardRozehnal GitHub The software is uploaded to the computer from an original disk image (eg ADF for Amiga), which is stored on a USB flash drive. This version of the hardware uses FlashFloppy firmware, which adds a lot of new features and…