Tag: atari
-
Atari STE motherboard in Kicad
The projects contains an approximative reconstruction of the motherboard’s PCB. It will be good enough to locate a given component and to know how a signal is distributed accross the board. And it allow to make nice 3D renderings. The release provides a PDF with the schematics, a PDF with the silkscreen of the motherboard…
-
UnoXT2 ZX Spectrum Next Compatible Clone
Second Generation of UnoXT Development Board with possibility running 20 Cores of Retro-Computers including legendary ZX Spectrum Next.Spartan 6 SLX25, BGA256 chip, 25K cells, SRAM 4MB, SDRAM 64MB, VGA, Audio Out with Volume control, SPDIF, PS/2 Keyboard and Mouse, SD-CARD or uSD-CARD, DB9 Joystick, ESP-07 Wi-Fi Module. Have 20 Cores of Retro-Computers ZX Spectrum EXP27ZX…
-
ATARI SXEGS Cartridge
Cartridge board and Housing for ATARI 65XE, 130XE, 800X, XEGS, 1200XL, 800XL, 600XL, 800, 400 8-bit computers based on SST39SF040 CMOS multi-purpose Flash memory chip. The ROM files for the cartridge are created from the XEX files using the CreaXin1 utility, and then merged using the XEGS Merger to combine four files into one, forming a total of 512 kb…
-
USB Joystick Adapter
If you want to connect your old favorite joystick to your computer, then this device is for you. Supports many retro joysticks, easy reflashing for your device. Project by Retronic Design on Github Schematic of the USB Joystick Adapter Supported devices Please see our binary section to download usable compiled code (.HEX) to flash your adapters. Flashing…
-
acsi2stm Atari ST ACSI hard drive emulator
Hard drive emulator for your Atari ST using an inexpensive STM32 microcontroller and a SD card. The aim of this project is to be very easy to build, extremely cheap, reliable and safe for your precious vintage machine. The module supports up to 5 SD card readers, showing them as 5 different ACSI devices plugged…
-
MIST FPGA
The MIST board was designed to implement classic 16 bit computers like the Amiga, Atari ST(E) or the Apple Macintosh (and even early 32 bit computers like the Acorn Archimedes) as a System-on-a-Chip using modern hardware. But it equally well supports 8 bit systems like the Atari 800/XL, ZX81, ZX Spectrum, C64, Atari VCS, Atari…
-
Greaseweazle
USB device and host tools allowing versatile floppy drive control. By extracting the raw flux transitions from a drive, any disk format can be captured and analysed: PC, Amiga, Amstrad, PDP-11, musical instruments, industrial equipment, and more. Greaseweazle also supports writing to floppy disks, from a range of image file formats including those commonly used…
-
M.CU.M.E – Multi CompUter Machine Emulator
A collection of 80th game Console and Computer emulators ported to Teensy, raspberry PICO and ESP32 MCUs.Have a look at the video: https://youtu.be/jlqoWH2X6gk This project is a spin-off of the TeensyCEC project https://github.com/Jean-MarcHarvengt/TeensyCEC Featuring Computer systems supported and status on various MCU platforms System Teensy3.6 Teensy 4.0 Teensy4.0 +PSRAM Teensy4.1 +PSRAM ESP32 ESP32-Wrover Pico Zx81…
-
Gotek Floppy Disk Emulator V2
Floppy disk emulator for old computers and machines, Amiga, Atari ST, etc. By RichardRozehnal GitHub The software is uploaded to the computer from an original disk image (eg ADF for Amiga), which is stored on a USB flash drive. This version of the hardware uses FlashFloppy firmware, which adds a lot of new features and…